Zinc coils and sheets formats and dimensions

elZinc Alkimi : elZinc® Natural/ elZinc Slate®/elZinc Graphite®/elZinc Crystal®/elZinc Oliva®/elZinc Lava®
1 coil per pallet 6 small coils per pallet Sheet (1000 kg* pallet)
    2000 x 1000 mm 3000 x 1000 mm
Thickness mm Width mm Aprox. length m Theorical weight kg Approx. length m Theorical weight kg Weight*/ Sheet kg Sheets / Pallet Weight* / Sheet kg Sheets / Pallet
0,7 500 397 1000 40 100
0,7 600 331 1000 34 100
0,7 670 296 1000 30 101
0,7 1000 198 1000 20 101  10,08  102  15,12  66
0,8 500 347 1000 34 98
0,8 600  289 1000 30 104
0,8 670 259 1000 30 116
0,8 1000 174 1000 17 98 11,52 89 17,28 58
 1 500 277 1000 28 101
 1 600 231 1000 23 99
 1 1000 138 1000 14 101 14,40 69 21,60 46

*Theorical weight

elZinc Slate® and elZinc Graphite®  sheets and coils are delivered with a protective film.

Coils inner diameter: Coil weight ≥250 kg : 508mm

Other dimensions and thicknesses are available upon request.

elZinc Rainbow®
1 coil per pallet 6 small coils per pallet  2000×1000 mm sheets
    approx. 200kg*/ pallet approx. 500kg* / pallet
Thickness mm Width mm Aprox. length m Theorical weight kg Approx. length m Theorical weight kg Weight* / Sheet kg Sheet nº/ Pallet Weight* / sheet kg Sheet nº / Pallet
0,7 500 397 1000 40 100
0,7 600 331 1000 34 100
0,7 670 296 1000 31 104
0,7 1000 198 1000 20 101  10,08  20  10,08  50
0,8 500 347 1000 35 101
0,8 600 289 1000 30 103
0,8 670 259 1000 26 100
0,8 1000 174 1000 17 98  11,52  17  11,52  43
 1 500 277 1000 28 101
 1 600 231 1000 23 99
 1 670 207 1000 21 101
 1 1000 138 1000 14 101 14,40 14 14,40 35

*Theorical weight

elZinc Rainbow® sheets and coils are delivered with a protective film.

Coils inner diameter: Coil weight <250 kg: 300mm /Coil weight≥250 kg : 508mm

Other dimensions and thicknesses are available upon request.

Recommendations

elZinc® is one of the most hard-wearing metals used in the construction sector. In order to preserve its qualities and ensure it maintains its principle characteristic – its high resistance to corrosion- it is important to bear in mind the recommendations  in our technical manuals “Handling storage and Transport”, and the  “Installation guide”.

The following are the basic rules which must be followed in each stage of the process.

STORAGE

elZinc´s products must be protected from bad weather and they should be stored in:

  • Dry, closed and well ventilated places.
  • Places that protect them from possible contamination by products or elements used or produced during the work (cement dust, dust from plaster…)
  • Avoid storing elZinc products in direct contact with the ground. The minimum recommended separation height is 10 cm.

TRANSPORT AND MAINTENANCE

elZinc’s products must be:

  • Protected from damp and bad weather
  • Transported using suitable pallets which have been correctly stored.
  • Transported in closed vehicles.

UNLOADING AND TRANSPORT ON SITE

elZinc’s material must be transported and unloaded on a stable base in order to avoid possible knocks and deformations.

INSTALLATION

During its placement it is absolutely necessary to follow these guidelines:

  • Suitability: Make sure that the zinc is compatible with the materials it will be in contact with.
  • Ventilation: To avoid risks from condensation, the material covering the zinc must be suitably ventilated.
  • Expansion: This must be borne in mind during installation to ensure airtightness.

ASLA_3665 elzinc SLATE

Instagram
LinkedIn
Facebook
YouTube
Pinterest